Wooden hangers for embroidery
WM30L
A hanger for quickly hanging a poster or embroidery. Made of plywood. It consists of four strips connected by magnets, one of the parts contains a hook to hang on the wall. Slat width 1.8 cm, slat thickness 0.6 mm
WM25L
A hanger for quickly hanging a poster or embroidery. Made of plywood. It consists of four strips connected by magnets, one of the parts contains a hook to hang on the wall. Slat width 1.8 cm, slat thickness 0.6 mm
995-06
Pendant in the shape of a heart, designed to hang a cross stitch. Dimensions 20 x 19 cm. Laser cut from 3 mm thick ground plywood. The embroidery is simply glued on the wood with Magic glue and then cut around with...
995-08
Pendant in the shape of a large wreath, designed to hang embroidery. Diameter 30 cm, hole diameter 10 cm. Laser cut from raw, sanded wooden plywood 3 mm thick. Just stick the embroidery on the wreath with Magic glue...
995-07
Wreath-shaped frame with painted holly. Designed to frame embroidery with a diameter of 20 cm. The diameter of the entire frame is 30 cm. Laser-cut from raw, sanded wooden plywood with a thickness of 3 mm. Just cut...
WM30
A hanger for quickly hanging a poster or embroidery. Made of high-quality wood. It consists of four strips connected by magnets, one of the parts contains a strap to hang on the wall. Slat width 1.8 cm, slat thickness...
WM50
A hanger for quickly hanging a poster or embroidery. Made of high-quality wood. It consists of four strips connected by magnets, one of the parts contains a strap to hang on the wall. Slat width 1.8 cm, slat thickness...
995-03
Egg-shaped frame for hanging embroidery measuring 11 x 15 cm or embroidered egg 12 cm. Laser cut from 3mm thick raw, wooden plywood. The embroidery is simply cut to the frame and glued under the frame with Magic glue....
995-04
Wooden frame in the shape of a bauble, designed to hold embroidery measuring 15 x 15 cm or embroidered Christmass ball 8 cm. Laser-cut from raw, wooden plywood 3 mm thick. The embroidery is simply cut to the frame and...
995-05
Stand for upright placing of the frame - Egg with bow (995-03) or Christmas ball with bow (995-04). Laser-cut from raw, double-sided wooden plywood with a total thickness of 8 mm. The stand makes it possible to place...
921-12
Hanger for hanging cross stitch and other embroidery with max. 26 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
921-11
Hanger for hanging cross stitch and other embroidery with max. 21 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
995-02
Pendant in the shape of a Christmas ball, designed to hang a cross stitch with diameter 15 cm. Laser cut from 5 mm thick ground plywood. 1 piece. The embroidery is simply glued on the wood with Magic glue and then cut...
921-08
Hanger for hanging cross stitch and other embroidery with max. 21 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
921-09
Hanger for hanging cross stitch and other embroidery with max. 26 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
921-10
Hanger for hanging cross stitch and other embroidery with max. 31 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
995-01
Pendant in the shape of an egg, designed to hang a cross stitch with dimensions of 11 x 15 cm. Laser cut from 6 mm thick ground plywood. 1 piece. The embroidery is simply glued on the wood with Magic glue and then cut...
921-07
Hanger for hanging cross stitch and other embroidery with max. 31 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
921-06
Hanger for hanging cross stitch and other embroidery with max. 26 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
921-01
Hanger for hanging cross stitch and other embroidery with max. 16 cm wide. Laser cut from raw, sanded 3 mm thick plywood. 1 piece.
921-02
Hanger for hanging cross stitch and other embroidery with max. 21 cm wide. Laser cut from raw, sanded 3 mm thick plywood. 1 piece.
921-03
Hanger for hanging cross stitch and other embroidery with max. 21 cm wide. Laser cut from raw, sanded 3 mm thick plywood. 1 piece.
921-04
Hanger for hanging cross stitch and other embroidery with max. 26 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
921-05
Hanger for hanging cross stitch and other embroidery with max. 31 cm wide. Laser cut from raw, sanded 5 mm thick plywood. 1 piece.
What are wooden hangers for?
Wooden embroidery hangers have laser-cut shapes for hanging embroidery of various sizes. Embroidery framing is professional and hassle-free.
What is needed for embroidery?
Some basic cross stitch tools are necessary to start embroidering. Such a "must have" for everyone who embroider is: embroidery floss, fabric, needles and scissors. If we already have an embroidered picture, then what to do with it? Our blog comes with help, in which it is described in detail how to frame the finished embroidery on wooden hangers.
How to hang embroidery on a hanger?
In order to hang an embroidered picure on the hanger, you need to find an embroidery hanger of the right length, i.e. the size matched to the size of the embroidery or slightly larger. Ironed and properly prepared embroidery should be hemmed around, hung on a wooden hanger. Then the upper edge of the embroidery should be sewn on the machine or by hand. In this way, everyone can wooden frame their own embroidery.