Hand embroidery supplies
The embroidered picture needs a frame. In our store you will find a large selection of interesting frames for your embroidery. Customize your own by buying a wooden frame, a wood-effect hoop, a bamboo hoop or a wooden hoop. Wooden hangers or metal hangers will work great. If you embroider Christmas decorations - Christmas balls or Easter eggs - you will certainly need decorative stands or pendants.
WM30L
A hanger for quickly hanging a poster or embroidery. Made of plywood. It consists of four strips connected by magnets, one of the parts contains a hook to hang on the wall. Slat width 1.8 cm, slat thickness 0.6 mm
WM25L
A hanger for quickly hanging a poster or embroidery. Made of plywood. It consists of four strips connected by magnets, one of the parts contains a hook to hang on the wall. Slat width 1.8 cm, slat thickness 0.6 mm
995-06
Pendant in the shape of a heart, designed to hang a cross stitch. Dimensions 20 x 19 cm. Laser cut from 3 mm thick ground plywood. The embroidery is simply glued on the wood with Magic glue and then cut around with...
995-08
Pendant in the shape of a large wreath, designed to hang embroidery. Diameter 30 cm, hole diameter 10 cm. Laser cut from raw, sanded wooden plywood 3 mm thick. Just stick the embroidery on the wreath with Magic glue...
995-07
Wreath-shaped frame with painted holly. Designed to frame embroidery with a diameter of 20 cm. The diameter of the entire frame is 30 cm. Laser-cut from raw, sanded wooden plywood with a thickness of 3 mm. Just cut...
RA-A3B
High-quality frame for framing a poster, made of aluminum with very narrow, elegant frames of 0,6 cm. The set includes a frame, plexiglass, HDF board and hangers for hanging vertically or horizontally. The plexiglass...
RA-A3C
High-quality frame for framing a poster, made of aluminum with very narrow, elegant frames of 0,6 cm. The set includes a frame, plexiglass, HDF board and hangers for hanging vertically or horizontally. The plexiglass...
ANT-RA-30X30
Anti-frame for placing posters, prints or photos. The product includes: safe plexiglass, approx. 1 mm thick, HDF back plate, mounting clips and hangers that allow hanging vertically or horizontally. Before hanging,...
ANT-RA-A3
Anti-frame for placing posters, prints or photos. The product includes: safe plexiglass, approx. 1 mm thick, HDF back plate, mounting clips and hangers that allow hanging vertically or horizontally. Before hanging,...
995-03
Egg-shaped frame for hanging embroidery measuring 11 x 15 cm or embroidered egg 12 cm. Laser cut from 3mm thick raw, wooden plywood. The embroidery is simply cut to the frame and glued under the frame with Magic glue....
995-04
Wooden frame in the shape of a bauble, designed to hold embroidery measuring 15 x 15 cm or embroidered Christmass ball 8 cm. Laser-cut from raw, wooden plywood 3 mm thick. The embroidery is simply cut to the frame and...
995-05
Stand for upright placing of the frame - Egg with bow (995-03) or Christmas ball with bow (995-04). Laser-cut from raw, double-sided wooden plywood with a total thickness of 8 mm. The stand makes it possible to place...
995-02
Pendant in the shape of a Christmas ball, designed to hang a cross stitch with diameter 15 cm. Laser cut from 5 mm thick ground plywood. 1 piece. The embroidery is simply glued on the wood with Magic glue and then cut...
995-01
Pendant in the shape of an egg, designed to hang a cross stitch with dimensions of 11 x 15 cm. Laser cut from 6 mm thick ground plywood. 1 piece. The embroidery is simply glued on the wood with Magic glue and then cut...
Embroidering at the desk or on the sofa?
Adjust the embroidery method to your needs. With us you will find sitting stands with s hoop, embroidery frames for a sofa or table holders. The most important thing is to spend time with your favorite embroidery pictures in a comfortable position. And after embroidering frame it into a nice embroidery frame to obtain the desired effect.
How to frame an embroidered picture yourself?
When the embroidery is finished, it is important that it does not end up in a drawer, but that it sees the light of day. You can hang it on the wall or give it as a gift. For this, you need to finish the embroidered picture with a wooden frame or a metal or wooden hanger.
You can choose the setting depending on your preferences and the style you want to achieve. Here are some common ways to frame cross stitch:
Wooden embroidery frame: You can use a ready-made embroidery frame that is specially designed to measure or available in stores in standard sizes. Embroidery frames can be purchased in a variety of sizes and styles. Simply insert the embroidery into the frame, first securing the edges and stiffening the embroidery, e.g. with cardboard, to secure it at the very end with hinges or clips attached to the frame.
Passe-partout and frame: If you want to add elegance and depth to your embroidery, you can use a passe-partout. Passe-partout is a decorative cardboard frame that surrounds the picture and gives it space in the frame. Choose a passe-partout in a color that matches the embroidery and place it in a traditional frame that blends well with your decor. You can use a specially prepared passe-partout card to create a greeting card with an embroidered pattern. More on this topic can be found in the subcategory: cards, bookmarks.
Decorative embroidery frames: If you are looking for more original ways to frame your embroidery, you can try decorative frames such as decorative wood-like hoops, bamboo hoops, decorative metal or wooden hangers for embroidery. These types of framing can give the embroidery a unique and artistic character.
Whichever method you choose to frame your cross stitch, remember to protect it from dust and light to preserve its beauty for longer.